Category: Clothing

How Do You Measure a Chainsaw Blade and Chain?

by

Cullen BlakemanIs your chainsaw starting to seem dull and not perform as well? Looks like it’s time to replace the chain. In order to do this, you will need to know the length of both the chainsaw blade as well as the length and size of your chain. If you’ve checked out the manufacturers’ charts, they might seem a little overwhelming. But it really is pretty simple once you understand what’s involved in the length of the blade and chainsaw chain.

When you’re ready to replace your chain, the first thing to do is determine the size of your chainsaw bar. If you happen to have an Oregon chainsaw, this should be easy. Just check the first two numbers of the ten-digit model number that is stamped on the motor end of the blade. That’s your chainsaw bar length.

Don’t have an Oregon chainsaw that easily shows you the length of the blade? Then here are some tips for figuring it out yourself.

How To Measure Your Chainsaw Blade

You may wonder how do you measure a chainsaw blade. To determine what size your chainsaw blade is, you need to measure starting from where the bar comes out of the casing all the way to the end of the bar.

To eliminate any confusion, the words “blade” and “bar” are both used interchangeably to refer to the same thing … the long metal blade that extends from the motor casing and holds the chain that does the actual sawing.

For all manufacturers, chain saw blades are made in 2-inch measurements. Although the most often seen are the 16-, 18- and 20-inch sizes, you can actually buy chainsaw blades as small as 10 inches or as long as 42 inches. If your blade measurement doesn’t end in an even number, then round up to the nearest one.

Measuring A Chainsaw Chain

To measure the chain on your chainsaw, there are two things you will need to know … the number of drive links and the pitch of the chain.

The number of drive links actually determines the length of the chain. A drive link is simply a tooth on the chain. The pitch of the chain will also affect the size of the drive links.

The pitch of a chain is the size of the chain. This is the distance between any three rivets, then divided by two. Your chain pitch is important because it must match the pitch of the drive sprocket and sometimes the bar nose sprocket. The pitch should be stamped on the drive link.

To be more specific, a 1/4″ pitch chain might have 52 drive links and be 2.17 feet in length, while a 3/8″ pitch with 52 drive links would be 3.18 feet in length. The number of drive links has a direct correlation to the blade length.

If you have any questions, the manufacturer of your chainsaw or anyone who makes chains should be happy to help you figure out what you need to know.

But if you know what size

chain saw blade

or

chainsaw chain

you need and are eager to buy a replacement, check out the huge selection and good deals at ChainsawDeals.com

Article Source:

eArticlesOnline.com}

byphineasgray

If you’re considering getting into the t-shirt business, you should become familiar with the different methods available for transferring text, logos, and images to a garment such as a t-shirt.

The two major methods used to transfer an image to a garment are heat transfers, and screen printed transfers.

Both methods have their advantages and disadvantages.

Heat Transfers

The process of heat transfer is much simpler than a screen printed transfer, but the image is not as permanent.

The artwork is printed on a special heat transfer paper. There are different qualities of paper depending on whether it’s intended for personal or professional use. Some consumer level printers are also available which can make higher quality heat transfers.

Once the image is printed on the transfer paper, the paper is pressed onto the garment and then heated for a short time. This melts a material in the paper called plastisol which seeps into the shirt. The back of the paper is then peeled from the shirt while the plastisol and the image remain on the garment.

Screen Printed Transfers

At a professional level, screen printed transfers are the most common. As far as print quality goes, this method of transferring an image to a garment is generally better. A screen print will usually last longer, and maintain higher levels of color saturation than a heat transfer.

A screen transfer is more difficult to do, however, and will require the use of more professional equipment to get a high-quality and long lasting image.

A screen print requires that you use a few different tools. First of all, you’ll need a screen. The screen is a wooden or steel frame with a special mesh material. It is pressed against the garment to transfer the ink. These screens must be cleaned after they are used, and they are quite large. If you plan on screen printing professionally, you should have a designated booth and garden hose with which to clean the screen, as well as an area to dry it.

The artwork is printed on special sheets that activate when exposed to UV light. These sheets are printed directly onto the screen mentioned earlier. This is similar to how photographs in non-digital cameras are exposed. Of course, you will either need self-contained exposure equipment for this, a darkroom or sunlight.

The screen that was mentioned earlier has a special chemical coating on it. This coating is then sprayed with a pressure hose. The chemical will eventually come off of the non-transparent portions of the image.

The screen is then pressed against the garment, and ink is applied to the sheet. The ink is then scrubbed across the screen. The ink will seep into the parts of the screen where the chemical was removed, which ultimately transfers the image to the shirt.

If multiple colors are used in the image or logo, this process will have to be repeated for the various colors.

Made to Order Medical Scrubs

by

LeMecheil

How would you feel when you are hurrying to find medical uniforms, and after a couple of hours stretching searching several stores, you can still find nothing? What a waste of time, you might say with a big sigh. How you wish theres a shop accepting custom-made or made-to-order medical scrubs, and that you can get there in a matter of few minutes from now. If thats what you wish for, be relieved to know Pulse Uniform has made-to-order service offered for less.

Why should you get made-to-order medical uniforms? Good fitting or size is the very reason why a customer wants a medical scrub tailor-made just for him or her. And so, the first benefit to get is correct sizing. The size range available is from XXS to 12XL, catering the needs of petites, medium, large, and even plus sized medical practitioners. The second thing is a good mixture of comfort and durability. Pulse Uniform also lets the customers choose which fabrics they want to use for their uniforms. To be fully satisfied of the new medical uniforms, color and styles shouldnt be missing. Choosing color and style is also given to the customers to decide on. Moreover, they also have the choice to add or alter several details on the preferred style. Simply give the complete details for the medical scrubs, and Pulse Uniform will take it all from there.

What kinds of medical uniforms can customers have as tailor-made? Theres a wide range of options to choose from. Customers can have made to order scrub tops, scrub pants, lab coats, scrub jackets, printed tops, nurses skirts, and even surgical caps. Imagine if you can have all these items tailor-made. Feel how it would be like wearing them all. Every piece of medical uniform you have are designed and created along with your very own ideas.

How much will made-to-order medical scrubs cost? When compared to the ready made medical scrubs, these items are a bit higher in price. Compared to the price in the market today, Pulse Uniform is definitely offering considerably lower prices. In fact, the cost can go for as low as $21.95. Still, deals like free shipping for at least $75 purchase can be availed. Same thing with reward points for every dollar spent, as well as with bulk orders.

How about processing and delivery? This is a question that must be thoroughly thought about. For one thing, waiting too long is not worth it. And that should only mean the store is not that reliable. Of course, glitches may occur. But too obvious carelessness and errors could not be acceptable. With Pulse Uniform, medical uniforms take 6 business days before shipping. The length of time used for the latter depends on whether the customer preferred UPS, USPS or next day air delivery service, and of course, on the location.

Now, size should not worry you anymore even when youve gained weight. You can always run to Pulse Uniform for made-to-order service to get that tailor-made medical scrub. For more detailed information visit Pulse Uniform anytime.

LeMecheil is a product consultant for

Medical Scrubs and Uniforms

at Pulse Uniform. Check our featured brands and complete line of the latest medical scrub designs at

Pulse Uniform

.

Article Source:

Made to Order Medical Scrubs}